angle of inclination
英 [ˈæŋɡl ɒv ˌɪnklɪˈneɪʃn]
美 [ˈæŋɡl əv ˌɪnklɪˈneɪʃn]
倾斜角；磁倾角
英英释义
noun
- (geometry) the angle formed by the x-axis and a given line (measured counterclockwise from the positive half of the x-axis)
双语例句
- According to the degree in which the original ground surface has been denuded, the magnitude and the angle of inclination of the major principal stress can be calculated ( such as the magnitude of the intermediate principal stress).
根据原始地面遭剥蚀的程度，可以大致地估算最大主应力和中间主应力的量值和方向； - An instrument used by surveyors in order to measure an angle of inclination or elevation.
用来测量倾斜角的测量员使用的装置。 - The static stability of offshore platform with bucket foundation is analyzed theoretically, and stability analyzed methods of the platform with small and large angle of inclination are discussed.
对筒形基础海洋平台的静稳性进行了理论分析，提出了平台在大、小倾角两种情况下的稳性分析方法。 - The trainer can provide learners the simulant melting rate of electrode, check up whether the moving rate of electrode and the angle of inclination of electrode are in the ranges set in advance.
该装置能给学员提供焊条摸拟熔化速率，能检测焊条移动速率、焊条倾角、焊条与工件间的距离是否在予先设定的范围内。 - The main function of the inclinometer is to measure the angle of inclination 、 azimuth and tool face angle.
随钻测斜仪的主要作用是完成井斜角、方位角、工具面角等参数的测量。 - The finite element software introduced the bit and established anisotropy of series of angle of inclination formation rock in air drilling. Investigate the mechanism of interaction between bit and formation rock and the procedure of PDC bit breaking rock.
建立了空气钻井中钻头钻进不同地层倾角地层岩石的动态过程的三维有限元仿真模型，并对PDC钻头破岩的过程以及钻头与岩石的相互作用机理进行了研究。 - Angle of inclination of conveyor in degree.
为皮带运输机的倾角，度； - The research of regulative method on angle of inclination of straightener
矫直辊倾角调整方法的研究 - Research on relationship between bone traction and angle of inclination of cross section of shaft bone fracture
骨干骨折断面倾角与骨牵引关系的探讨 - When the speed is big, it is good to have a certain angle of elevation, on the contrary, it need not have the angle of elevation; it is suitable for the radial angle of inclination of the scavenging port to be 20 ° or so.
当转速较大时适合有一定的仰角，反之，则不必有仰角；扫气口的径向倾斜角设计在20°左右比较合适。